COMMUNITY Community Help  |  Community Rules
0 Replies | Add to Watchlist
agrimachinery
agrimachinery
China
No Company Website
Overall Ranking
MP: 1660
Rank: 1

2017-08-11 16:51 Reply
How much do you know about Operation Rules for SMALL RICE MILLING LINE
 

How much do you know about Operation Rules for SMALL RICE MILLING LINE

 

SMALL RICE MILLING LINE :

Incoming SMALL RICE MILLING LINE  inspection procedures (1) into the SMALL RICE MILLING LINE workshop processing of raw materials, including rice, rice and so on. Confirm the variety and quantity of incoming. (2) Request the latest (3 days) SMALL RICE MILLING LINE quality inspection report of the batch. (3) if necessary, to carry out SMALL RICE MILLING LINE quality inspection of incoming inspection, to the responsibility of raw material quality management (4) and the SMALL RICE MILLING LINE production plan in the raw material requirements to determine whether the required raw materials, if any differences should be notified The person in charge of the workshop is dealt with according to regulations. (5) inform the SMALL RICE MILLING LINE feeding staff feeding time and feeding position.

 

Discharge SMALL RICE MILLING LINE Operation Procedure 1. Ensure that the SMALL RICE MILLING LINE material after the scale is safely transported to the feed port. If scattered, should be required to transport SMALL RICE MILLING LINE workers in a timely manner to recover; if the impact of material quality factors (such as rain, etc.), the timely suspension of transport. 2, check and remove the SMALL RICE MILLING LINE discharge operation area has the impact of material quality factors, requiring the discharge process in the discharge area to complete. 3, check the SMALL RICE MILLING LINE transport of bulk material vehicles, to confirm the vehicle material has been completely unloaded; check bag material empty packaging, to confirm the bag material has been all poured out. 4, SMALL RICE MILLING LINE sorting out the material during the discharge process, and all into the feeding port. 5, for material transfer procedures.

 

Clean up the SMALL RICE MILLING LINE operating procedures 1. Fix the SMALL RICE MILLING LINE equipment to ensure that the device does not move during use. Make sure that the outlet of the equipment is aligned with the feed port of the warehouse and that no rigid contact occurs. 2, check the early SMALL RICE MILLING LINE screening of the drum screen surface, remove the impurities on the screen surface. 3, check the early SMALL RICE MILLING LINE screening of the drum screen surface, the screen surface should be no damage, if damaged should be replaced immediately (replacement method see "equipment maintenance and maintenance manual"). 4, under the miscellaneous hanging hanging bag, to ensure that SMALL RICE MILLING LINE impurities do not leak.
http://www.rice-milling-machine.org/products/Small-Rice-Milling-Line/
 
Go to page
Post Topic  Ask Question